[ Freshour Manufacturing - Daewoo Puma10 Lathe Program - written 11-16-2006 by JP
[ Revised For Inconel 825 08-13-2008 by JP. This Program is designed to turn threaded
[ plugs (1.750 OAL) 1.250 inches of thread under the head using 1 3/8 Hex bar.
[ The tool shank stops at start point (3 inches) away from chuck for a stop.
%
O0825 ( INCONEL825 1.250 PLUGS )
( * START X -291.485 - START Z -429.255 * )
G20 G90 (INCH, ABSOLUTE)
G92 X-1.500 Z-0.4560 (SET START POINT)
G96 S0350 (CSS 350 FEET PER MINUTE)
G92 S2000 (MAX RPM 2000)
G00 Z0.000 M03 (SPINDLE CCW)
G95 F0.010 M08 (FEED PER R.010, COOLANT ON)
G00 X3.000 Z3.000
T1111 (TRIANGLE TOOL)
G00 Z0.200
G00 X1.750
G01 Z-1.750 (ROUGH 1)
G01 X1.800
G00 Z0.200
G00 X1.700
G01 Z-1.750 (ROUGH 2)
G01 X1.800
G00 Z0.200
G00 X1.650
G01 Z-1.750 (ROUGH 3)
G01 X1.800
G00 Z0.200
G00 X1.600
G01 Z-1.750 (ROUGH 4)
G01 X1.800
G00 Z0.200
G00 X1.550
G01 Z-1.750 (ROUGH 5)
G01 X1.800
G00 Z0.200
G00 X1.500
G01 Z-1.290 (ROUGH 6)
G01 X1.800
G00 Z0.200
G00 X1.450
G01 Z-1.290 (ROUGH 7)
G01 X1.800
G00 Z0.200
G00 X1.400
G01 Z-1.290 (ROUGH 8)
G01 X1.800
G00 Z0.200
G00 X1.350
G01 Z-1.220 (ROUGH 9)
G01 X1.800
G00 Z0.200
G00 X1.300
G01 Z-1.220 (ROUGH 10)
G01 X1.800
G00 Z0.200
G00 X1.250
G01 Z-1.220 (ROUGH 11)
G01 X1.800
G00 Z0.200
G00 X1.200
G01 Z-1.220 (ROUGH 12)
G01 X1.800
G00 Z0.200
G00 X1.150
G01 Z-1.220 (ROUGH 13)
G01 X1.800
G00 Z0.200
G00 X0.900 (CHAMFER +0.023)
G00 Z0.020
G01 X1.140 Z-0.100
G01 Z-1.004 (ROUGH 14)
G01 X1.023 Z-1.062
G01 Z-1.162
G01 X1.148 Z-1.225
G01 X1.375
G01 Z-1.295
G01 X1.800
G00 Z0.200 (CHAMFER TO SIZE)
G00 X0.877
G00 Z0.020
G01 X1.117 Z-0.100
G01 Z-1.004 (FINISH TURN)
G01 X1.000 Z-1.062
G01 Z-1.162
G01 X1.125 Z-1.225
G01 X1.370
G01 Z-1.300
G01 X1.800
G00 Z6.000 M09 (COOLANT OFF)
M01 (OPTIONAL STOP)
T1010 (THREAD TOOL)
G97 S1500 M3 (CSS CANCEL, 1500 RPM)
M08 (COOLANT ON)
G00 X1.15 Z.2182
G76 X1.0228 Z-1.125 K511 D200 E.08333 A29
G00 X2.500 M09 (COOLANT OFF)
G00 Z6.000
M01 (OPTIONAL STOP)
T0909 F0.002 (PART OFF TOOL, FEED .002)
G96 S0350 (CSS 350 FEET PER MINUTE)
G92 S1500 M08 (MAX RPM 1500, COOLANT ON)
G00 X1.800
G00 Z-1.660
G01 X-0.050
G00 X1.800 M09 (COOLANT OFF)
G00 Z6.000
T1212 (BAR STOP)
G00 X-1.500 Z0.000 (STOP POSITION)
M05 (SPINDLE STOP)
M30 (PROGRAM END - RESET)
%